ExtremeSwitching (VSP)

Expand all | Collapse all

MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device ?

  • 1.  MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device ?

    Posted 11-13-2018 02:27
    MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device?


  • 2.  RE: MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device ?

    Posted 11-13-2018 02:37
    Hi Alok Just create a load share group on the NAS. Remember, if LACP is required, you'll need to create single-port LAGs on the mlag ports as well. Brad


  • 3.  RE: MLAG configured on core switches, How do we provide redundant connectivity to our Dell-NAS device ?

    Posted 11-13-2018 06:06
    Hi,

    If the downstream device (e.g. switch, server, etc..) is using LACP LAG sharing on its ports, it will be necessary to enable LACP LAG on the MLAG ports. This has to be done prior to enabling the port for mlag


    enable sharing port grouping algorithm addressed-based [ L2 | L3 | L3_L4 ] lacp

    (the algorithm needs to match the downstream device)