ExtremeSwitching (EOS)

Expand all | Collapse all

Inter-VLAN Routing Between Two 220 Series Switches

  • 1.  Inter-VLAN Routing Between Two 220 Series Switches

    Posted 12-18-2018 15:01
    Hello,

    I've configured a 220 series switch to route 3x VLANs. This is working fine. There is a trunk port connecting to a 2nd 220 series switch. Do I need to configure routing in this edge switch?


  • 2.  RE: Inter-VLAN Routing Between Two 220 Series Switches

    Posted 12-18-2018 15:31
    No, your edge switch should just be talking layer 2 to the 220 with the 3 vlans setup for routing.


  • 3.  RE: Inter-VLAN Routing Between Two 220 Series Switches

    Posted 12-21-2018 15:59
    I got this all setup and working I believe.

    Now, for multicast, I have IGMP snooping enabled and I do see IGMP Querier packets on both switches.

    I currently have IGMP snooping enabled on all interfaces and a video VLAN. Should I disable it on the ports and leave it on just the VLAN?

    If I just have the two switches connected via a trunk, do I need to have a multicast router port assigned?

    Also, I believe immediate leave should be disabled on the trunk ports, correct?