ExtremeSwitching (EOS)

  • 1.  S4 to X460 LAG

    Posted 04-20-2015 12:02
    I am new to the EOS side of things. I am trying to setup a LAG between a S4 and a X450. I am confident in my xos configuration but I am unsure on the eos side of things. Here is what I have on the xos side of things:

    enable sharing 1:14 grouping 1:14-15 algorithm address-based L2 lacp
    configure vlan Test add ports 1:14 tagged

    Here is what I think I need on the eos side of things:

    set lacp aadminkey lag.0.10 100
    set lacp singleportlag enable
    set port lacp port ge.1.47 aadminkey 100
    set port lacp port ge.1.48 aadminkey 100
    set port lacp port ge.1.47 enable
    set port lacp port ge.1.48 enable
    set vlan egress 3 lag.0.10 tagged

    Can anyone confirm that the eos side of things looks correct?



  • 2.  RE: S4 to X460 LAG

    Posted 04-21-2015 09:11
    Sometimes i have problems with lag on S series. Have you tried static lags ? If you don't need dynamic assignment then try to add it staticaly. Try set lacp static lag.0.10 ge.1.47-48 100

    don't forget to enable lag globally, it's very common issue :)


  • 3.  RE: S4 to X460 LAG

    Posted 04-27-2015 13:42
    Thanks Tomasz!

    I have not tried with static lags. I will give that a shot.

    What is the command to enable Lag globally? maybe I just missed that part.