ExtremeSwitching (EOS)

Expand all | Collapse all

SSA180 Bonding - wrong PSU fan speed output with show system hardware

  • 1.  SSA180 Bonding - wrong PSU fan speed output with show system hardware

    Posted 01-10-2018 09:10
    Hello everyone!
    We have two SSA180 Chassis with bonding configured.
    If we now try to get the hardware status with "show system hardware" command at CLI, we can not see the fan speed of both power supplies in chassis 2.

    I have changed the power supply unit 2 from chassis 1 to PSU 2 in chassis 2 and vice versa. And again I can see only the fan speed in chassis 1 for PSU 1 and PSU 2.
    All four PSU fans are running fine.
    This looks like a little bug.

    I have no other customer environment to verify this (SSA-180 with bonding configured).

    Has anybody seen this too?

    SSA-Bonding(su)->sh vers

    Copyright (c) 2017 by Extreme Networks, Inc.

    Slot Model Serial # Versions
    ------ ---------------- -------------------- -------------------------
    1 SSA-G8018-0652 12500090685B Hw: 2
    Bp: 01.01.25
    Fw: 08.62.04.0001
    2 SSA-G8018-0652 12500106685B Hw: 2
    Bp: 01.01.25
    Fw: 08.62.04.0001

    SSA-Bonding(su)->sh system hardware

    CHASSIS 1 HARDWARE INFORMATION
    ------------------------------

    Chassis Type: Bonded SSA Chassis (0x15)
    Chassis Serial Number: 12500090685B
    Chassis Version: 0
    Chassis Power Redundancy: Redundant
    Chassis Power Supply 1: Installed & Operating
    Type = SSA-FB-AC-PS-A
    Power = 460 Watts
    Input/output type = AC/DC
    Input status = OK
    Output status = OK
    Fan 1 speed = 10467 RPM
    Chassis Power Supply 2: Installed & Operating
    Type = SSA-FB-AC-PS-A
    Power = 460 Watts
    Input/output type = AC/DC
    Input status = OK
    Output status = OK
    Fan 1 speed = 10477 RPM
    Chassis Fan 1: Installed & Operating
    Chassis Fan 2: Installed & Operating
    PoE Power Redundancy: Redundancy Not Supported
    PoE Power Supply 1: Info Not Available
    PoE Power Supply 2: Info Not Available
    Ambient Temperature: 32.50 C

    CHASSIS 2 HARDWARE INFORMATION
    ------------------------------

    Chassis Type: Bonded SSA Chassis (0x15)
    Chassis Serial Number: 12500106685B
    Chassis Version: 0
    Chassis Power Redundancy: Redundant
    Chassis Power Supply 1: Installed & Operating
    Type = SSA-FB-AC-PS-A
    Power = 460 Watts
    Input/output type = AC/DC
    Input status = OK
    Output status = OK
    Fan 1 speed = 0 RPM
    Chassis Power Supply 2: Installed & Operating
    Type = SSA-FB-AC-PS-A
    Power = 460 Watts
    Input/output type = AC/DC
    Input status = OK
    Output status = OK
    Fan 1 speed = 0 RPM
    Chassis Fan 1: Installed & Operating
    Chassis Fan 2: Installed & Operating
    PoE Power Redundancy: Redundancy Not Supported
    PoE Power Supply 1: Info Not Available
    PoE Power Supply 2: Info Not Available
    Ambient Temperature: 32.0 C



  • 2.  RE: SSA180 Bonding - wrong PSU fan speed output with show system hardware

    Posted 01-22-2018 16:45
    I would Recommend that you call into GTAC for assistance with this issue.



  • 3.  RE: SSA180 Bonding - wrong PSU fan speed output with show system hardware

    Posted 01-23-2018 08:59
    Thank you for this hint. I have opened a case for that.