ExtremeSwitching (EOS)

Expand all | Collapse all

S8 legacy installed based configuration doubt

  • 1.  S8 legacy installed based configuration doubt

    Posted 08-31-2018 10:08
    Could you please help me identify this customer chassis configuration and why it shows slots numbers higher than 8 if the chassis has only 8 slots?

    Chassis Serial Number: 122252xxxxxx

    Slot Model Serial # Versions
    ------ ---------------- -------------------- -------------------------
    2 ST4106-0248 121102xxxxxx
    5 SK1208-0808-F6 141904xxxxxx
    6 SK1208-0808-F6 122354xxxxxx
    8 ST4106-0248 100854xxxxxx
    10 ST4106-0248 121101xxxxxx
    13 SK1208-0808-F6 122252xxxxxx
    14 SK1208-0808-F6 122353xxxxxx
    16 ST4106-0248 121102xxxxxx[/code]
    Option Modules:Slot Module Model Serial # Versions
    ---- ------ ---------------- -------------------- -------------------------
    5 1 SOK1208-0104 122200xxxxxx Hw: 8
    5 2 SOG1201-0112 114403xxxxxx Hw: 8
    13 1 SOK1208-0104 122200xxxxxx Hw: 8
    13 2 SOG1201-0112 121153xxxxxx Hw: 8
    ================================================[/code]
    (Edited by CM to mask serials)


  • 2.  RE: S8 legacy installed based configuration doubt

    Posted 08-31-2018 10:28
    This system is running Chassis Bonding and is comprised of two S8 chasssis with connected with ports converted to bonding ports. This article gives a sample: How to configure Virtual Switch Bonding (VSB) on S-Series or K-Series


  • 3.  RE: S8 legacy installed based configuration doubt

    Posted 08-31-2018 10:29
    Looks like that the customer has 2x S8 chassis bonded together.
    You'd run the below command to see all the information....

    XYZ(su)->show system hardware brief

    CHASSIS 1 HARDWARE INFORMATION
    ------------------------------

    Chassis Type: Bonded S8 Chassis (0x13)
    ........


  • 4.  RE: S8 legacy installed based configuration doubt

    Posted 08-31-2018 10:33
    Hia all, I imagine the chassis is in bounding but I could not find a fabrica module that supports the VSB feature, since customer is using SK1208-0808-F6


  • 5.  RE: S8 legacy installed based configuration doubt

    Posted 08-31-2018 10:33
    If the fabric doesn't have dedicated VSB ports, then it must have the license S-EOS-VSB: S-Series Multi-slot chassis Virtual Switch Bonding License Upgrade, (For use on S130/S150 Class Modules and S140/S180 Class Modules without HW VSB ports)