ExtremeSwitching (EOS)

  • 1.  snmpset to clear ARP table entry on the s4 Enterasys SW

    Posted 06-13-2017 14:32
    I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with other models such B5G124-48.


  • 2.  RE: snmpset to clear ARP table entry on the s4 Enterasys SW

    Posted 07-12-2017 05:23
    in that command you failed to include a community (-c) and IP. if these were omitted intentionally then can you check the snmp section within the S4 to verify you have read/write access?