ExtremeSwitching (EOS)

MSTMAP? Switch is VLAN 9 with SID 5, but stats show it in SID 0

  • 1.  MSTMAP? Switch is VLAN 9 with SID 5, but stats show it in SID 0

    Posted 07-17-2018 19:06
    I have a switch with the following config:
    #spantree
    set spantree mstcfgid cfgname 'SP4' rev 1
    set spantree msti sid 2 create
    set spantree msti sid 3 create
    set spantree msti sid 4 create
    set spantree msti sid 5 create
    set spantree mstmap 9 sid 5
    set spantree mstmap 10 sid 5
    set spantree mstmap 17 sid 5
    set spantree mstmap 18 sid 5
    set spantree mstmap 38 sid 5
    set spantree mstmap 43 sid 5
    set spantree priority 8192 0
    set spantree priority 8192 2
    set spantree priority 8192 3
    set spantree priority 8192 4
    set spantree priority 8192 5

    set host vlan 9

    So with this config, this switch should be in SID 5. yet when I run show spantree stats i get:

    Spanning tree status - enabled
    Spanning tree instance - 0
    Designated Root MacAddr - 3C:A8:2A:29:29:00
    Designated Root Port - ge.1.23
    Designated Root Priority - 0
    Designated Root Cost - 20000
    Root Max Age - 20
    Root Hello Time - 2
    Root Forward Delay - 15
    Bridge ID MAC Address - 00:1F:45:91:FC:10
    Bridge ID Priority - 8192
    Bridge Max Age - 20
    Bridge Hello Time - 2
    Bridge Forward Delay - 15
    Topology Change Count - 1634
    Time Since Top Change - 0 days 0:01:58
    Max Hops - 20
    SID Port State Role Cost Priority
    --- ---------- ---------------- ----------- -------- --------
    0 ge.1.23 Forwarding Root 20000 128
    0 ge.1.24 Forwarding Designated 20000 128

    Why is this switch in SID 0????