ExtremeSwitching (EOS)

Expand all | Collapse all

MSM B does not synchonize with MSM A

  • 1.  MSM B does not synchonize with MSM A

    Posted 03-06-2018 13:23
    Hello,

    We have a BD8806 with two MSM-48c slots. but Backup slot B is not syncing with slot A,
    I checked Memory usage and only 4% is used!

    Omurga_SW02.18 # show slot
    Slots Type Configured State Ports Flags
    -------------------------------------------------------------------------------
    Slot-1 8900-10G24X-c 8900-10G24X-c Operational 24 M
    Slot-2 8900-10G24X-c 8900-10G24X-c Operational 24 M
    Slot-3 10G2Xc 10G2Xc Operational 2 M
    Slot-4 10G2Xc Initializing 2
    Slot-5 Empty 0
    Slot-6 G48Tc(PoE) G48Tc(PoE) Operational 48 M
    MSM-A MSM-48c Operational 0
    MSM-B MSM-48c Present 0

    Omurga_SW02.17 # show sw

    SysName: Omurga_SW02
    SysLocation: SAMULAS
    SysContact: support@vegaalarm.com,+903224562228
    System MAC: 00:04:96:99:55:75
    System Type: BD-8806

    SysHealth check: Enabled (Normal)
    Recovery Mode: All
    System Watchdog: Enabled

    Current Time: Tue Mar 6 16:04:52 2018
    Timezone: [Auto DST Disabled] GMT Offset: 180 minutes, name is not set.
    Boot Time: Tue Jan 2 11:51:13 2018
    Boot Count: 14
    Next Reboot: None scheduled
    System UpTime: 63 days 4 hours 13 minutes 39 seconds

    Slot: MSM-A * MSM-B
    ------------------------ ------------------------
    Current State: MASTER BACKUP

    Image Selected: primary primary
    Image Booted: primary primary
    Primary ver: 12.5.4.5 16.2.3.5
    patch1-6
    Secondary ver: 12.5.4.5 16.1.3.6

    Config Selected: primary.cfg
    Config Booted: primary.cfg

    primary.cfg Created by ExtremeXOS version 12.5.4.5
    487068 bytes saved on Tue Mar 6 08:59:51 2018

    Your help is highly appriciated!
    Yusuf


  • 2.  RE: MSM B does not synchonize with MSM A

    Posted 03-06-2018 13:27
    Hello Yusuf,

    Is it giving you an error? or failing during the synchronization?


  • 3.  RE: MSM B does not synchonize with MSM A

    Posted 03-06-2018 13:33
    Image differences ... you can't have one running 12.5 and the backup running 16.2.

    You will need to downgrade B or update A.

    To downgrade B to A's image you could force a sync. This should be not effect network and be non-impacting. A will copy it's primary and secondary images over to B and B will reboot and come back up synced. It would be better to upgrade to current code but you would have to have a system reboot for that due to code differences


  • 4.  RE: MSM B does not synchonize with MSM A

    Posted 03-06-2018 13:33
    Hello@EtherMAN,

    I cannot find 16.2, could you please help downloading it!?

    Thank you
    Yusuf


  • 5.  RE: MSM B does not synchonize with MSM A

    Posted 03-06-2018 13:33
    And
    - What if I did a


  • 6.  RE: MSM B does not synchonize with MSM A

    Posted 03-06-2018 13:46
    you will need a valid support contract to access the downloading of images... You will need to call TAC if you do not have a contract and this is a new card to see what options you may have.