ExtremeSwitching (EOS)

  • 1.  Blade 1 of 2 failed in bonded S1 Chassis

    Posted 10-29-2015 13:53
    Will the configuration copy over to the replacement blade once the chassis sees the new blade. Or will I have to redo the config for the replaced blade, in a bonded situation.


  • 2.  RE: Blade 1 of 2 failed in bonded S1 Chassis

    Posted 10-29-2015 16:52
    It is a bit more complicated when working with singe fabric systems. The bond must be
    establisted first then the configuration pushed.
    Please read the following article:
    https://community.extremenetworks.com/extreme/topics/s-series-virtual-switch-bonding-chassis-replace...

    If you are still having trouble give us a call.