ExtremeSwitching (EOS)

Expand all | Collapse all

max port mirrors

  • 1.  max port mirrors

    Posted 02-15-2018 14:07
    what is the max port mirrors on ExtremeSwitching 200 and is there a comparison to a X440?


  • 2.  RE: max port mirrors

    Posted 02-15-2018 18:39
    Hello Chris,

    You can have a maximum of 4 mirrors active on a 200-Series at one time. Many-to-one mirrors are allowed, so the number of sessions that are active is dictated by the number of destination mirror ports have been configured.

    For example, you could have four 10-to-1 mirrors active on a switch concurrently.

    The commands are fairly simple. Here is an example of a simple 1-to-1 mirror, you'll need to be in config mode:

    monitor session 1 source interface 1/0/1 *** Defines source interface
    monitor session 1 destination interface 1/0/48 *** Defines destination interface
    monitor session 1 mode *** Activates mirror

    Best Regards,

    Steve Geisser
    GTAC ESE


  • 3.  RE: max port mirrors

    Posted 02-16-2018 03:11
    Hello Chris,

    The following article references the information about mirrors on x440.
    https://gtacknowledge.extremenetworks.com/articles/Q_A/How-many-mirrors-does-the-X440-support

    Best regards,