Data Center (SLX)

  • 1.  MLXe Rbridge vs VRID

    Posted 06-26-2018 19:05
    I am working on configuring VRRP instances in a pair of MLXe routers. Can the Rbridge ID and the VRID be the same value? I was told they could not but our config shows otherwise.

    Also, after poking around "the Hub" it appears that I can use the same VRID for all VLANs that will be used in both MLXe routers. Is this good practice or just convenience?

    Thank you.

  • 2.  RE: MLXe Rbridge vs VRID

    Posted 06-29-2018 05:52

    When using MCT the cluster rbridge-id must be unique on each device.

    With respect to VRRP(e) VRID as you mention the same VRID can be used in each instance running in their own VLAN.

    I have seen this done both ways many times, some just set VRID as 1 in every VLAN which is valid and works fine. Others vary the VRID for each VLAN but obviously there is only 1 to 255 available.

    It simply comes down to what works best for you there is not a hard and fast rule for this.