Data Center (VDX)

FCoE problem in a VCS Fabric

  • 1.  FCoE problem in a VCS Fabric

    Posted 09-10-2018 12:40
    Hi all,
    I'm working on a network topology as following



    Brocade VDX are configured as VCS Fabric - Logical Chassis mode and also, using VDX6740 I enable FCoE on some interface.
    On SAN side, I saw correctly FCoE login from both VDX, so either on interface on rbridge-id 1 and r-bridge 2 while on DELL MXL I/O I can see login only on one r-bridge. Both VDX interfaces are configured in same manner. The strange thing is that when I disable ISL links between VDX, so I remove VCS fabric feature, I can see FCoE login from both DELL MXL
    Do you known about some limitation on FCoE over the ISL (or TRILL link). If can be possibile I would connect Dell Switch in Dual Homing with vLag. Do you known if this is possible in this kind of architecture?

    Thanks in advance for reply

    Best Regards

    Beppe
    [i]