Data Center (VDX)

Expand all | Collapse all

Routing question with VDX. I don't want this route.

  • 1.  Routing question with VDX. I don't want this route.

    Posted 03-09-2018 18:40
    Hello!
    I have a question about my Vdx-6740 fabric.
    I have a laptop who is pluged into a router (R1).
    R1 is pluged in VDX54.
    VDX54 is pluged in VDX53 (Fabric ISL Trunk)
    And the institution (ECO) is pluged in VDX53.

    On VDX54, I have:
    Vlan 912: 10.1.54.11
    Vlan 195: 172.16.32.2
    Vlan 198: 172.16.0.2

    On VDX53, I have:
    Vlan 154: 10.54.8.121
    Vlan 195: 172.16.32.3
    Vlan 198: 172.16.0.3
    Vlan 921: 10.1.18.10

    If I have a look on routing table on VDX54:



    I do not want packets to go through roads 172.
    How do I do that?

    In a fabric, do I have to set the virtual interface for each vlan on each VDX or it's works like a stack?

    I uploaded a screen shot of the routing table and a little plan for connection.

    Thanks!

    BYe!





  • 2.  RE: Routing question with VDX. I don't want this route.

    Posted 07-30-2018 18:26
    L3 configuration should be done on each VDX separately