Data Center (VDX)

Expand all | Collapse all

Apply ACL to ISL port

  • 1.  Apply ACL to ISL port

    Posted 08-30-2018 01:02
    I want to apply ACL to VDX ISL port.
    However, the following error message occurs when applying:

    Bottom_SW1(conf-if-fo-1/0/49)# ip access-group Test_ACL out
    %% Error: Edgeport configurations are not allowed on ISL ports.
    Shutdown interface to apply such configurations.

    The interface can be applied by shutdown. (and no shutdown)
    Does access-group work in this case?

    Thanks,
    KYUNGCHAN.



  • 2.  RE: Apply ACL to ISL port

    Posted 08-30-2018 10:57
    ACL's should be applied on edge ports not on ISL ports



  • 3.  RE: Apply ACL to ISL port

    Posted 08-30-2018 16:09
    Hi KYUNGCHAN,

    You can shutdown interface, disable ISL and apply ACL
    ACLs are not allowed on ISL links,

    Best Regards,
    Yulia