Data Center (MLX & CER/CES)

Expand all | Collapse all

ipsec on netiron CER 2024*

  • 1.  ipsec on netiron CER 2024*

    Posted 02-27-2018 08:13
    Hi there!

    I have 4 routers: 2x NetIron CER 2024C , NetIron CER 2024C-4X , NetIron CER 2048F

    Could you please tell me, they support IPSEC? It is possible to configure them with IPSEC?


  • 2.  RE: ipsec on netiron CER 2024*

    Posted 02-27-2018 08:40




  • 3.  RE: ipsec on netiron CER 2024*

    Posted 02-27-2018 08:40
    this uis from the Support Matrx 6.200.
    Hope that helps .



  • 4.  RE: ipsec on netiron CER 2024*

    Posted 02-27-2018 11:09
    Hi, Michael !
    Thank u 4 ur reply! So, if i have on my CER 2024* firmware ver V5.8.0a , for me ipsec is unavailable - this correct?


  • 5.  RE: ipsec on netiron CER 2024*

    Posted 02-27-2018 11:45
    correct. ( from the Matrix )
    Encryption and decryption of IP packets and the tunnel setup using IKEv2 can be done only on the BR-MLX-10GX4-M IPSEC line card.
    Have a look please into the "Security Configuration Guide" page 203 ff.. for the features you looking for .



  • 6.  RE: ipsec on netiron CER 2024*

    Posted 02-27-2018 13:04
    But i cant see this features _only_ for mlx* series on http://www.brocade.com/content/dam/common/documents/content-types/configuration-guide/netiron-05900-... here is just examples with mlx ...
    There is no modules with ipsec (ikev2) for CER 2000 (2024) series?


  • 7.  RE: ipsec on netiron CER 2024*

    Posted 02-27-2018 13:28
    yes there are no modules with ipsec (ikev2) for CER 2000 (2024) series


  • 8.  RE: ipsec on netiron CER 2024*

    Posted 02-28-2018 08:36
    Ok, Michael , thank you so much! 🙂