ExtremeSwitching (Other)

Expand all | Collapse all

Hi people, I'm a new in Zabbix and I'd like to monitoring PoE on switch Extreme. Someone would have a template tip?

  • 1.  Hi people, I'm a new in Zabbix and I'd like to monitoring PoE on switch Extreme. Someone would have a template tip?

    Posted 10-23-2018 15:42
    Hi people, I'm a new in Zabbix and I'd like to monitoring PoE on switch Extreme. Someone would have a template tip?


  • 2.  RE: Hi people, I'm a new in Zabbix and I'd like to monitoring PoE on switch Extreme. Someone would have a template tip?

    Posted 10-24-2018 16:40
    Amaury,

    If Zabbix is capable of using SNMP OID polling (which I am sure it is), then you could configure a template to poll the extremePethSlotPoeStatus OID of .1.3.6.1.4.1.1916.1.27.1.2.1.8

    The switch will respond with one of the following values:
    • Initializing - PoE controller is under initialization
    • Operational - PoE controller is operation and is ready or providing power
    • downloadFail - PoE controller required udate and th e update failed. PoE reset is required to re-update
    • invalidFirmware - PoE controller contains invalid firmware
    • mismatchVersion - PoE controller update completed, however version mismatches expected, reboot.
    • updating - PoE controller is being updated
    • invalidDevice - PoE controller detected an invalid/bad PoE device
    • notOperational - PoE controller is not yet operational
    • other - PoE controller is an undefined state