ExtremeSwitching (Other)

Expand all | Collapse all

Lacp lag L3 address

  • 1.  Lacp lag L3 address

    Posted 11-05-2017 06:02
    Hello everyone! I have an Extreme switch x620-16x. I need to configure lag port according to source OR destination IP address. So I have to configure as the following commands [configure sharing address-based ...] but the OS cann't recognize the [address-based]. My license level is Edge and my OS version is 21.1.1.4 patch1-5. Is there any solution?]


  • 2.  RE: Lacp lag L3 address

    Posted 11-05-2017 06:27
    Hi Amir,

    It looks to be platform limitation on X620.

    Please find the below article for more information:

    https://gtacknowledge.extremenetworks.com/articles/Q_A/Custom-Algorithm-option-for-sharing-not-avail...

    Regards,
    Karthikeyan



  • 3.  RE: Lacp lag L3 address

    Posted 11-05-2017 19:57
    Hi Amir,

    as a short advice - please install recent firmware 22.3.1.4-Patch1-4 on that switch - it makes more fun ....

    Regards,
    Matthias


  • 4.  RE: Lacp lag L3 address

    Posted 11-05-2017 06:27
    So bad. Thanks


  • 5.  RE: Lacp lag L3 address

    Posted 11-05-2017 06:27
    Hi Amir,

    Kindly reference your our config guide about "Customer Algorithms" on Load-sharing algorithms.

    Custom hash algorithm is not supported on ExtremeSwitching X440G2 and X620 series switches.

    http://documentation.extremenetworks.com/exos_22.3/EXOS_21_1/Slots_and_Ports/c_link-aggregation-stan...

    Best regards,
    Bin