ExtremeSwitching (Other)

Expand all | Collapse all

How send a SNMP Traps test to the Network Management?

  • 1.  How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 02:08
    Hi All,

    I am working on the integration of Extream Network 450a switch to the Network Management system, the integration is already done, but we want to make some test, Can you please let me know how can I test this traps?

    Thank you so much in advanced

    Luis Melendez


  • 2.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 02:18
    Please log into the switch and type in the following command:
    “configure snmp add trapreceiver

    If no SNMP trap receiver is configured, EXOS will not send traps. Use command "show configuration snmp" and "show management" output to see the trap receiver is configured.



  • 3.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 02:21
    Use the command "show management" and check the counter "SNMP traps" is increased.

    Please use the below url to download the MIB Browser Personal Edition (3rd party):
    http://www.ireasoning.com/download.shtml

    After installing, go-to tab Tools -> Trap receiver -> then initiate a port UP/DOWN from switch trap and you will see the SNMP traps in ireasoning tool.





  • 4.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 02:46
    Hi All, Thank you so much for your answers.... The SNMP configuration on the switch is done, I am looking for a way to send a trap for test.

    Best Regards

    Luis Melendez


  • 5.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 02:52
    Hello Luis,

    Are you using Extreme Management Center as Network Management system?

    If yes, you could reference to the following script
    Netsight: How to configure a summit switch to send a SNMP v3 trap to Netsight, and have Netsight correctly log the trap for that switch
    https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-How-to-configure-a-summit-switch-...

    Best regards,
    Bin



  • 6.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 03:04
    Hi Please use the "create SNMP trap" command. I think this is what you're looking for Thanks Brad


  • 7.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 03:04
    Hi Luis,

    Please see if this command works for you.
    create snmp trap severity info event test "this is a test trap"



  • 8.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-26-2017 03:06
    GREAT!!! this is that we need !!! Thank you so much!!!



  • 9.  RE: How send a SNMP Traps test to the Network Management?

    Posted 07-27-2017 22:21
    Hello Luis,

    Add command reference for "create SNMP trap"
    http://documentation.extremenetworks.com/exos_commands_22.2/exos_21_1/exos_commands_all/r_create-snm...

    Thanks
    Bin