ExtremeSwitching (Other)

Extreme is happy to announce that you can now configure ERPS on an ISW Industrial Switch!

For configuring ERPS from the web interface, see:
https://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/_Common/c_erps-intro.shtml

For configuring ERPS from the CLI, see:
https://documentation.extremenetworks.com/industrial_switches/CLI/Industrial_Switching/_Common/r_erp...

For the release notes see:
8-port: https://documentation.extremenetworks.com/release_notes/industrialswitches/9038880-01_ISW-Series-8-port-Industrial_Switches_v1.01.01.0005_ReleaseNotes.pdf

12-port: https://documentation.extremenetworks.com/release_notes/industrialswitches/9038881-01_ISW-Series-12-port-Industrial_Switches_v1.01.01.0005_ReleaseNotes.pdf

Great news thanks!

Great news!

Any plans for ELSM, IP Source Guard, Dynamic ARP inspection features on ISW (Industrial Grade) series switches. It will help us to integrate with other extreme X series switches.

Hi, I would like to open these links, but there are both dead. Can you send them to me by email ?
Thank by advance.

For configuring ERPS from the web interface, see:
http://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/c_erps-intro.shtml

For configuring ERPS from the CLI, see:
http://documentation.extremenetworks.com/industrial_switches/CLI/Industrial_Switching/r_erps-config.shtml

Sharad,

You can learn about Dynamic ARP on the ISW switch here: http://documentation.extremenetworks.com/industrial_switches/web_config/industrial_switching/web_use...

I'm looking into the other features for you as well.

Thanks Christina! I am looking to configure Telnet server for IPv6 and SSH for IPv6 on ISW switch , but unable to get its configuration in manual. Please help for these as well as I have to deploy ISW in IPv6 enabled network. looking forward for your support

Waiting for your response, looking forward for your response.

Hi there - I see you got some help with in these other threads: https://community.extremenetworks.com/extreme/topics/ipv6-support-on-isw and https://community.extremenetworks.com/extreme/topics/elsm-support-on-isw-series-industrail-grade-swi...

For SSH, you can enable SSH in the GUI by going to Configuration > Security > Switch > SSH. (More here: http://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/Web_Use...)

For IPv6, you can configure IPs in the GUI by going to Configuration > System > IP. (More here: http://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/Web_Use...)

You can also use the Loop Protection feature in place of ELSM (Configuration > Loop Protection, see http://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/Web_Use...).

Let me know if this is helpful or you need something more. Thanks!

It looks like these pages got moved. Here are the updated links:

https://documentation.extremenetworks.com/industrial_switches/web_config/Industrial_Switching/_Commo...

https://documentation.extremenetworks.com/industrial_switches/CLI/Industrial_Switching/_Common/r_erp...

Thanks Christina - I updated the links in your original post 🙂

Thank you ! That will help me a lot ! Have a good day Christina