ExtremeSwitching (Other)

  • 1.  failed k-10 blade

    Posted 05-04-2015 14:11
    I have a K-12 switch and one of the blades stopped working. So I replaced the blade and the status light did not come on, and none of the ports on that blade work. What could be the problem?



  • 2.  RE: failed k-10 blade

    Posted 05-04-2015 23:14
    Hello, Is the K series showing messages in the logging buffer for this slot?


  • 3.  RE: failed k-10 blade

    Posted 05-08-2015 20:40
    Ako,

    Just following up. Are you still having issues with the K?


  • 4.  RE: failed k-10 blade

    Posted 05-11-2015 17:05
    Nope, it seemed to have cleared-out working as it should now. Thanks!


  • 5.  RE: failed k-10 blade

    Posted 05-11-2015 17:58
    Good news, keep us posted if things change. Typically that logging buffer is a great place to go on the K to see why the slot is failing. You can paste the error message into our GTAC Knowledge Site. If we know about the error, it should give you recommendations on next steps.