ExtremeSwitching (Other)

  • 1.  set admin status

    Posted 03-17-2014 14:59
    How to set the admin status of a port from the CLI - I can set them from the Web interface easily enough but I wanted to know the corresponding command to edit the "Admin Status" field in the show port status command


  • 2.  RE: set admin status

    Posted 03-17-2014 15:10
    Are you using ExtremeOS?



  • 3.  RE: set admin status

    Posted 03-17-2014 15:51
    If it's a EOS switch, then the command is 'set port enable ' or 'set port disable '

    If it's an EXOS switch I believe the command is 'enable ports ' or 'disable ports '


  • 4.  RE: set admin status

    Posted 03-17-2014 16:22
    Got it. Thanks guys!