ExtremeSwitching (Other)

Expand all | Collapse all

What can i use LRM SFP+ Modules in?

  • 1.  What can i use LRM SFP+ Modules in?

    Posted 09-28-2018 07:09
    Hi there

    I've found on 10GB LRM SFP+ modules while having a clean up after my manager left and I don't know what I can use them for.
    All I know about these is that LRM stands for Long Range Multimode and it uses1310nm lasers.
    Currently I use SR SFP+ modules.

    The model of switches I use are:

    X460-G2-48P-10G4
    X620-16X
    X670-G2-48X-4Q

    Question is: Can I use these modules in any of my switches and what can I use these modules for?

    Thanks

    Tristram


  • 2.  RE: What can i use LRM SFP+ Modules in?

    Posted 09-28-2018 07:12
    Hi, Tristam!

    You can check all compatible type of optics by link - https://www.extremenetworks.com/support/compatibility-matrices/summit-extremeswitching-and-e4g-compo...

    Thank you!


  • 3.  RE: What can i use LRM SFP+ Modules in?

    Posted 09-28-2018 10:34
    Hi, Tristram. According to the Hardware/Software Compatibility Matrix for Summit/ExtremeSwitching optics support (link posted by Alexandr above): out of the 3 switches you mentioned, only the X460-G2 supports the 10G LRM SFP+ module -- and only with VIM-2x.

    Hope this helps.

    Larry Kunz
    Information Development
    Extreme Networks


  • 4.  RE: What can i use LRM SFP+ Modules in?



  • 5.  RE: What can i use LRM SFP+ Modules in?

    Posted 09-28-2018 11:25
    Is there an updated copy of this Data sheet that shows some Extreme products? Not the old Enterasys stuff. Also this sheet is from 2014 😞


  • 6.  RE: What can i use LRM SFP+ Modules in?