ExtremeSwitching (Other)

  • 1.  S1- Hardware Utilization (IDLE)

    Posted 12-23-2013 19:32
    Hi friends,

    I have a problem, I have a s1 with approximately 1200 users, sometimes the computer processing up to 95%. In the show I can see that support the process up is one called "IDLE" I wonder which may be ocacionados this problem.

  • 2.  RE: S1- Hardware Utilization (IDLE)

    Posted 12-24-2013 14:05
    Hello Rafael Andres Martinez Jimene,

    The 'idle' process is the percentage of time the CPU is not working, active, or being used.
    It is normal for this task to have the highest percentage of time associated with it.
    It is similar to the 'System Idle Process' on the Microsoft Windows Operating System.

    If you run the command 'show system utilization cpu' it will show the total process utilization not including the 'idle' process.

    If there are times when the 'show system utilization cpu' results show 95% you would then want to run the 'show system utilization process' command and see which non-idle process or processes are running high.

    Thank you.

  • 3.  RE: S1- Hardware Utilization (IDLE)

    Posted 07-10-2014 05:26
    On the other Hand what about the storage usage. I have the same number of users as Rafael and when I enter "Show System Utilization storage " I get "1048576KB Size 141879KB Available RAM " . That is ca. 85% Memory RAM usage. This permanent value was also confirmed when using OneView. What could be here the Problem? Is the Switchs'Memory underdimentioned?

    I would appritiate it if I can get some Infos about this issue.