ExtremeSwitching (Other)

Expand all | Collapse all

How to configure voice and data vlan on the same 200 series switch

  • 1.  How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 03:07
    Hi Team,

    we have 2 VLANs for voice and data, we need to access both VLAN on the same 200 series switch port.

    what are the procedures to configure the switch port?


  • 2.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 04:42
    Hello Niyas,
    you need to untagg the ports for data vlan, and tagg the ports for voice vlan.
    the voice end point needs to send the vlan id. If you use the 210 serie, then you need a additional L3 device (firewall, router) to route between the 2 vlan's, if you use the 220 serie, this is a L3 switch and can route between the two vlan's.



  • 3.  RE: How to configure voice and data vlan on the same 200 series switch



  • 4.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 05:13
    Thanks for your updates


  • 5.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 05:16
    1. Enter config


    (Extreme 220) #config


    2. Enter port config mode
    (Extreme 220) (Config)#interface 1/0/2

    3. Configure the following
    (Extreme 220) (Interface 1/0/2)#voice vlan 110
    (Extreme 220) (Interface 1/0/2)#switchport mode access
    (Interface 1/0/2)#switchport access vlan 10
    (Interface 1/0/2)#switchport trunk native vlan 10
    (Interface 1/0/2)#switchport trunk allowed vlan 110
    (Interface 1/0/2)#exit

    This is correct or not?


  • 6.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 05:45
    no need for "switchport access vlan 10" because you configure it with "switchport trunk native vlan 10"


  • 7.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 05:55
    Hi Ronald

    I have already configured, need to remove Switchport access VLAN 10?



  • 8.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 04:42
    (Extreme 220) (Interface 1/0/2)#voice vlan 110
    (Extreme 220) (Interface 1/0/2)#switchport mode access
    (Interface 1/0/2)#switchport access vlan 10
    (Interface 1/0/2)#switchport trunk native vlan 10
    (Interface 1/0/2)#switchport trunk allowed vlan 110
    (Interface 1/0/2)#exit

    This is correct or not?


  • 9.  RE: How to configure voice and data vlan on the same 200 series switch

    Posted 06-13-2018 04:42
    Can anyone share any configuration of most services in a switchn extreme 210 and 220 series? These are not XOS, there is no clear documentation of this series of equipment. Thank you[/code]