ExtremeSwitching (Other)

  • 1.  access-list zone

    Posted 02-10-2014 12:46
    I have a question
    I have a switch black diamond 8800. This switch has the next configuration.

    configure access-list zone SYSTEM application Netlogin application-priority 3
    configure access-list zone SECURITY application GenericXml application-priority 2

    How can I to see the ACLs zone? How work these ACL?


  • 2.  RE: access-list zone

    Posted 02-10-2014 13:48
    Good Morning David
    To view the ACL you can use the command show access-list with the Zone option

    "show access-list interface"
    "show access-list {rule rule {start} } [ any | port port | vlan vlan_name ] {zone"
    "zone_name { appl-name appl_name {priority number }}} {ingress | egress} {detail}"

    This is documented in the EXOS_Command_reference_guide

    A write up on Access-list zones can be found in the EXOS_Concepts_Guide

    Both guides can be accessed here http://www.extremenetworks.com/support/extreme-support/documentation/

    Thanks
    P



  • 3.  RE: access-list zone

    Posted 02-10-2014 13:48
    Hello, Paul!

    Could you please explain for what reason the following default strings were added to configuration on BD and X8:

    configure access-list zone SYSTEM application NetLogin application-priority 4 configure access-list zone SYSTEM application HealthCheckLAG application-priority 5

    configure access-list zone SYSTEM application IdentityManager application-priority 6

    configure access-list zone SYSTEM application VMTracking application-priority 7

    configure access-list zone SYSTEM application PolicyManager application-priority 8

    Thank you!