ExtremeSwitching (Other)

  • 1.  Error Message in Logging Buffer

    Posted 05-09-2014 10:42
    What does the following message means in logging buffer. System is a S-Series Device with Firmware Version 8.21.02.0001

    Dune[5.dTcmTask]Petra[0] Received Interrupt PB_IRE_BURST_ERR_FOLLOW_SOP_IS_ERR instance 0, count 2, value= 0x1


  • 2.  RE: Error Message in Logging Buffer

    Posted 05-09-2014 11:15
    This message was previously reported with S-Series firmware 8.21.02.0001, related to a VSB port in transition to up or down.

    After engineering review; it is deemed to be informational only, does not indicate a problem, and the logging will be corrected - probably suppressed - in a future firmware release.


  • 3.  RE: Error Message in Logging Buffer

    Posted 04-29-2015 13:18
    I am also getting the same message on logging buffer, in addition I get:

    Received Interrupt PB_NIF_SRD_LANE_INT from slot 6 (fuji 4), count 0, value= 0xc0

    Received Interrupt PB_MAL_LINK_STATUS_CHANGE_INT from slot 6 (fuji 4), count 6, value= 0x1

    Received Interrupt PB_MAL_RX_PCS_LN_SYNC_STAT_CHANGE_INT from slot 6 (fuji 4), count 6, value= 0xc



  • 4.  RE: Error Message in Logging Buffer

    Posted 05-07-2015 16:09
    Nico, let us know if you have any follow up questions on this topic or if this answer is sufficient for you.