ExtremeSwitching (Other)

  • 1.  Extreme X670-48t share port 45-48(Copper or Fiber)

    Posted 07-24-2015 08:18
    Hi ,

    Please advice,

    After Stacking 2 Switches X670-48t with both switches port 47-48 with Extreme 10306 SFP+ Cable. My switch port 45 and 46 not able to working with copper connected with port 45 and 46.

    Attach some config photo .



  • 2.  RE: Extreme X670-48t share port 45-48(Copper or Fiber)

    Posted 07-24-2015 09:17
    Hi ck, hows life? Haha is it combo port?


  • 3.  RE: Extreme X670-48t share port 45-48(Copper or Fiber)

    Posted 07-24-2015 10:22
    CJ la~~i am fine 🙂 how are you? Still at Extreme:P

    It share port like the attachment. I not share whether can 47 & 48 using fiber stack and 45 & 46 using copper.





  • 4.  RE: Extreme X670-48t share port 45-48(Copper or Fiber)

    Posted 07-24-2015 11:11
    Hello,

    When you stack the X670-48T, X670 or X670v-48x with SummitStack-V, ports 47,48 are stacking and ports 45 & 46 are sacrificed and not able to be used. This is because the PHY for them control 4 of the ports. When you enable stacking-support that PHY is converted to stacking and therefore not able to be used. Here are is the stacking information sheet... Please see the note on the X670 - http://documentation.extremenetworks.com/summit/Summit_Family_HW_Install/Stacking/c_using-the-summit...

    NOTE: Ports 45 and 46 are not available as data ports when the alternate stacking ports are used.

    Bill


  • 5.  RE: Extreme X670-48t share port 45-48(Copper or Fiber)

    Posted 07-30-2015 21:57
    Thank you very much.