ExtremeWireless (Identifi)

 View Only

  • 1.  3825i console access issue

    Posted 10-13-2017 10:20
    Hello, everybody,

    could you please tell me how can I manage 3825 over console.

    I've connected to it using 115200bps, I can see it's startup log output, but can't login. It does not accept keys input.

    Is it possible?

    Many thanks in advance,

    Ilya



  • 2.  RE: 3825i console access issue

    Posted 10-13-2017 10:27
    It should boot to a prompt where it would accept input from the console. I would try a different cable. What are you trying to do in the shell? In the 10.41 code we added the remote shell tab to the ap properties:
    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-SSH-or-open-the-AP-s-Remote-Console...



  • 3.  RE: 3825i console access issue

    Posted 10-13-2017 10:30
    Hello, Ilya!

    Did you check that console cable with right pins and all pins is connected?
    https://gtacknowledge.extremenetworks.com/articles/Solution/WS-AP3825i-booting-to-boot-mode-when-a-l...
    May be Tx signal don't received by AP from lap-top?

    Thank you!


  • 4.  RE: 3825i console access issue

    Posted 10-13-2017 10:30
    I've used CISCO cable. What a fun thing? I can see console output from AP, but can't input commands...


  • 5.  RE: 3825i console access issue

    Posted 10-13-2017 10:30
    We had a similar issue so we stopped using those and started using a USB one https://www.tripplite.com/usb-rj45-cisco-serial-rollover-cable-usb-type-a-rj45-6-ft-microsoft-surfac...