ExtremeWireless (Identifi)

Expand all | Collapse all

AP3917i/e - 2nd port is a client port

  • 1.  AP3917i/e - 2nd port is a client port

    Posted 04-05-2018 19:53
    The documentation (datasheet, installation guide) show that both ports are uplink ports but as per release note and the controller GUI the 2nd port is a client port.

    APs with client ports are the best so could you please fix that and release more models in the future :-)

    Thx,
    Ron


  • 2.  RE: AP3917i/e - 2nd port is a client port

    Posted 06-13-2018 19:30
    Hi Ron,

    Thanks for pointing out the discrepancy. We'll fix the corresponding documents. Indeed the correct configuration is:

    Port 1: Uplink 1x 10/100/1000 Mbps autosense Ethernet port

    Port 2: Client Port 1 x 10/100/1000 Mbps autosense Ethernet port (Does not provide POE), Policy protected access.

    Paulo





  • 3.  RE: AP3917i/e - 2nd port is a client port

    Posted 06-13-2018 19:33
    Will do. Thank you.