ExtremeWireless (Identifi)

Expand all | Collapse all

how to active access point ws-ap3805i connect to wireless controller c35

  • 1.  how to active access point ws-ap3805i connect to wireless controller c35

    Posted 03-05-2018 08:58
    how to active access point ws-ap3805i connect to wireless controller c35




  • 2.  RE: how to active access point ws-ap3805i connect to wireless controller c35

    Posted 03-05-2018 09:20
    is that ap connected over WAN/VPN? is a ping from ap to ewc possible?
    if yes check AP -> Static configuration -> Tunnel MTU and lower that value eg 1300 instead of 1500



  • 3.  RE: how to active access point ws-ap3805i connect to wireless controller c35

    Posted 03-05-2018 10:55
    Hi, the screenshot shows an AP3825i and not an AP3805i.

    Because you don't provide any details about the steps you've performed or i.e. a network diagram I don't see any chance to help you..... i.e. the AP in the screenshot could be manualy added or it was discovered which is a big difference.

    The best advice I'd give you is to pay a Extreme Partner to install/configure it for you and also give a brief workshop so you'd perform configuration in the future by yourself.

    BR,
    Ron


  • 4.  RE: how to active access point ws-ap3805i connect to wireless controller c35

    Posted 03-06-2018 12:15
    Hi,

    check out your license..I hope it's not in a DEMO mode?
    Need enter a eval license or get a valid license.

    Regards
    Umut Aydin



  • 5.  RE: how to active access point ws-ap3805i connect to wireless controller c35

    Posted 03-06-2018 12:16
    Hi,

    if AP3805 in question ..seee please this one.
    https://gtacknowledge.extremenetworks.com/articles/Q_A/Minimum-firmware-version-for-WS-AP3805

    Rgds
    Umut Aydin



  • 6.  RE: how to active access point ws-ap3805i connect to wireless controller c35

    Posted 03-05-2018 09:20
    hi ,
    No ping AP it not possible
    and I change MTU but no result.