ExtremeWireless (Identifi)

  • 1.  Daisy chain another network device off the LAN2 port of a AP3825i?

    Posted 08-18-2015 22:58
    We have a case where we have an network connected projector very close to out AP's. Can I provide connectivity by daisy chaining it to the LAN2 port of a AP3825i. Perfect world would be to have it on its own VLAN.


  • 2.  RE: Daisy chain another network device off the LAN2 port of a AP3825i?

    Posted 08-19-2015 09:32
    Not at this time, the system is not setup to work like that.


  • 3.  RE: Daisy chain another network device off the LAN2 port of a AP3825i?

    Posted 08-19-2015 09:32
    Hello

    This isn't possible, this article explains how the 2 ports on the AP work: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-default-operational-status-of-the... -Gareth



  • 4.  RE: Daisy chain another network device off the LAN2 port of a AP3825i?

    Posted 08-19-2015 11:39
    I appreciate all feedback. I had seen the document on the "Default Operational..." The terminology does make one wonder if there are any other operational modes. Are there? If so what are they and how are they implemented?


  • 5.  RE: Daisy chain another network device off the LAN2 port of a AP3825i?

    Posted 08-19-2015 11:44
    Nothing at this time, we could re-word that article to make sure it's clear.


  • 6.  RE: Daisy chain another network device off the LAN2 port of a AP3825i?

    Posted 08-19-2015 12:09
    Hello

    I've modified the article a little to hopefully clear things up, as for your original question, this is not possible.

    -Gareth