ExtremeWireless (Identifi)

 View Only
  • 1.  No Backup Tunnel

    Posted 05-05-2015 16:48
    Hi, I have 2 virtual Controller V2110 at Hyper V. They are in availability mode (fast failover). All APs in the same subnet as the physical Interfaces of both controllers are established the primary and backup tunnel. The APs there are not in the same subnet do not establish the backup tunnel. I changed the Tunnel MTU size to 1300 but it doesnt work.


  • 2.  RE: No Backup Tunnel

    Posted 05-05-2015 17:00
    I would suggest collecting the trace log packages on a few of your access points and provide them to GTAC support for review:

    How to get those files:
    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Collect-Access-Point-Logging-Information-Trace-Bundle

    Also get a tech support file from both your controllers:
    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Collect-a-Tech-Support-File-From-a-Wireless-Controller


  • 3.  RE: No Backup Tunnel

    Posted 05-05-2015 17:00
    Thanks for fast response, we are searching in the customer network. If we are not successful so i will do so.


  • 4.  RE: No Backup Tunnel

    Posted 05-05-2015 17:00
    No problem Frank...


  • 5.  RE: No Backup Tunnel

    Posted 05-21-2015 15:10
    Frank,

    Checking in to see if you needed any further assistance with this?