ExtremeWireless (Identifi)

Expand all | Collapse all

Why is the 'Received' Rate(Mbps) a lot less than the 'Transmitted Rate?

  • 1.  Why is the 'Received' Rate(Mbps) a lot less than the 'Transmitted Rate?

    Posted 02-14-2018 13:33
    I have the C5210 controller with 3605APs. I'm looking at the 'Reports' and 'Wireless Statistics' and then 'View Clients' per Radio. I noticed under the Received Rate column is quite a bit different than the Transmitted column. Is that normal? I thought clients would be downloading (Receiving) more Mbps from the AP and uploading, sending, (Transmitting) to the AP?



  • 2.  RE: Why is the 'Received' Rate(Mbps) a lot less than the 'Transmitted Rate?

    Posted 02-14-2018 13:40
    I may be wrong but this looks like the it is from the perspective of the AP. This means the received rate is what the client is sending to it and the send looks like a generic speed based on what type of signal the client is using (a54 or n300).


  • 3.  RE: Why is the 'Received' Rate(Mbps) a lot less than the 'Transmitted Rate?

    Posted 02-14-2018 13:40
    Correct, that is why you'd only see the RSSI in the rx section because it's the signal strenght that the AP has for that client.


  • 4.  RE: Why is the 'Received' Rate(Mbps) a lot less than the 'Transmitted Rate?

    Posted 02-14-2018 13:40
    Is there a report that shows how many Mbps each client is getting, like a download speed, or how much bandwidth each clients is using? I did download and install the NetSight tool, but still working on setting it up to view some better reports.


  • 5.  RE: Why is the 'Received' Rate(Mbps) a lot less than the 'Transmitted Rate?

    Posted 02-14-2018 13:40
    You'd run a report for a certain client....



    or get even deeper information with Analytics (needs another VM running)....