ExtremeWireless (Identifi)

Expand all | Collapse all

10.41.10 - dashboard, low link speed shows wrong value

  • 1.  10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-23-2018 18:33
    Hi,

    I've just upgraded a customer controller from 10.41.05 to 10.41.10 and now the dashboard show 213 APs with low link speed = all APs.

    I've checked one switch with about 10 APs and the "show port no" result is that all the AP ports are actual speed/duplex of 1000/full.

    Tried a reboot of 10 APs but no change.
    If you click on the low link speed counter the pop-up list only 3 APs - not sure whether that is the max that is shown in this window.

    I'd see the same result on my lab controller - even there are only 8 out of 12 with low link speed - I know that is also not correct.

    Is that a known issue !?

    -Ron


  • 2.  RE: 10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-23-2018 18:36
    Thanks Craig..... so more overtime to upgrade to 10.41.11 :-)

    KR,
    Ron


  • 3.  RE: 10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-23-2018 18:39
    https://gtacknowledge.extremenetworks.com/articles/Solution/10-41-10-code-clicking-low-link-speed-li...

    This doc needs to be altered to list low link when there really isn't as well but at 1 time we thought it was 2 different problems and wrote 2 docs.


  • 4.  RE: 10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-24-2018 08:20
    Any ETA on the release date for 10.41.11 ?

    Thanks,
    Ron


  • 5.  RE: 10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-24-2018 08:20
    Ron

    Provisional release date is 14/11/18, although this maybe subject to change.

    -Gareth



  • 6.  RE: 10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-24-2018 08:20
    Thanks Gareth


  • 7.  RE: 10.41.10 - dashboard, low link speed shows wrong value

    Posted 10-23-2018 18:35
    Hello Ron
    Yes it is a known issue and fixed already by Engineering and will be in the 10.41.11 release.