ExtremeWireless (Identifi)

Expand all | Collapse all

WDS Bridge Point-to-point Link

  • 1.  WDS Bridge Point-to-point Link

    Posted 05-06-2017 11:33
    What the behavior of a WDS Bridge link between two sites in an controller loss scanerio?

    Will it maintain the WDS Link ?

    Exemple: Using two Access-point 3865, with two options enable: ( Maintain client sessions in event of poll failure, Restart service in the absence of controller)



  • 2.  RE: WDS Bridge Point-to-point Link

    Posted 05-06-2017 11:47
    WDS will still work in that case.


  • 3.  RE: WDS Bridge Point-to-point Link

    Posted 05-06-2017 11:58
    That was the intention, but it isn't working.

    I'm running V2210 in 10.31.01.0048 with 2 AP3865E with no comunication with the controller and the WDS Bridge link is Down.

    I have open a case



  • 4.  RE: WDS Bridge Point-to-point Link

    Posted 05-06-2017 12:06


  • 5.  RE: WDS Bridge Point-to-point Link

    Posted 05-06-2017 12:52
    I'm running a V2110 with the same version and I've just enabled my WDS and it works if the link to the controller is down ( AP3801i in my case).

    My setup....

    Controller - LAN - AP-parent ......... WDS.......... AP-child/WDS bridge - LAN - PC

    Is it the same for you = connect LANs in different buildings via WDS or is the client in building#2 connected via WLAN to the WDS-child.
    If that is the case what privacy/authentication is used on the WLAN service.


  • 6.  RE: WDS Bridge Point-to-point Link

    Posted 05-07-2017 15:29
    Hi,

    The Setup is that. Site 1 : Controller - LAN - F.O - Site 2: - LAN - AP Parente ....wds.... SIte 3: AP Child - Lan - PC.

    Tomorrow we will investigate



  • 7.  RE: WDS Bridge Point-to-point Link

    Posted 05-08-2017 13:54
    Valter

    Does the WDS link stay up for a few minutes before it goes down?

    If so I believe in this case the preferred option is to use MESH, not WDS.

    If you really have to use WDS for some reason, for example, an existing deployment, it maybe easier to create a site and add parent and child to this site.

    Let me know if this helps.

    -Gareth