ExtremeWireless (Identifi)

  • 1.  MU/client report with AP3912i

    Posted 02-01-2018 10:21
    I've a "special" setup which looks like that....

    AP3912i --> wired port#3 connects an AP3801i and MUs are connected to this AP with a bridge@AP topology.

    Everything works but the thing that bugs me is that the MUs are shown as 802.3 clients in the client report.

    That isn't completely wrong because the MAC is bridge@AP on the AP3801i to port#3 of the AP3912i but I thought that the 802.11 information would take precedence over the 802.3 information in the report.

    example> the first line show the AP3801i connected to P3 of the AP3912, the other 2 clients are connected via wireless to the AP3801i but are shown as wired on the AP3912i



    -Ron


  • 2.  RE: MU/client report with AP3912i

    Posted 02-01-2018 11:57
    Please open a GTAC case.


  • 3.  RE: MU/client report with AP3912i

    Posted 02-05-2018 17:57
    If a client in my scenario is moviing from the AP3801i to another AP (AP3825e in the below example) that has a direct CAPWAP connection the port/protocol is still 802.3 even the MU is clearly connected via 802.11 (screenshot below).