ExtremeWireless (Identifi)

  • 1.  Third party AP support

    Posted 06-11-2015 17:36
    Hi guys

    I have configured a physical interface for third party AP's as per the attached screenshot.

    I then create the Wlan 3rd party service but am a bit lost as to how this mapps to a outbound topology.

    I currently have 2 ISP's connected to esa1 on different vlans.
    I would like to map the thrid party AP's traffic to one of the ISP vlans.

    With a normal WLAN service I can set the B@HWC topology af default or apply a role that B@HWC.

    With the third party WLAN you can not assign a topology.

    Any assistance on how the thrid party AP works and how to configure it.

    Thx

    Andre



  • 2.  RE: Third party AP support

    Posted 06-11-2015 17:50




  • 3.  RE: Third party AP support



  • 4.  RE: Third party AP support

    Posted 04-27-2016 12:46
    Via a third party VNS you can apply access rules/filters to wireless traffic running over a parallel wireless network but our controllers do not manage non-EXTR APs