ExtremeWireless (Identifi)

Expand all | Collapse all

Ap2660 Login issues, default password not working

  • 1.  Ap2660 Login issues, default password not working

    Posted 05-29-2018 18:13
    I have many legacy ap2660 devices, and they are set to get a dhcp address, then we hard code the wireless controller (via telnet). I have found that many of these devices do not let me log into them with the default admin / new2day credentials. We have not changed the password, and I have held the red reset button down for about 30 seconds. Even after that I still cannot log in. Are there other credentials that I can use to log in, or is there another way to connect to these to perform administration tasks?

    Thanks,
    Dave


  • 2.  RE: Ap2660 Login issues, default password not working

    Posted 05-29-2018 18:17
    You could also try using the following: Username: admin / Password: e~=2.718


  • 3.  RE: Ap2660 Login issues, default password not working

    Posted 05-29-2018 18:18
    Hello David the default password for the 2600 series AP's was admin with e~=2.718 as the password


  • 4.  RE: Ap2660 Login issues, default password not working

    Posted 05-29-2018 18:30
    Great thanks!!!!
    Is there a way to mark this answered / solved?


  • 5.  RE: Ap2660 Login issues, default password not working

    Posted 05-29-2018 18:30


    All set and marked.