ExtremeWireless (Identifi)

  • 1.  Find WPA and WPA2 Connections

    Posted 07-31-2015 07:41

    we have two virtual WLAN Controller V2110. Does somebody know if it´s possible to see, which Clients use WPA and which Clients use WPA2 in the same SSID. We have activated WPA and WPA2 in one SSID but now we Change the Group Policy in the AD to only allow WPA2. In the next weeks we also want to deactivated WPA at the WLAN Controller, but i can´t find any Report who lists the Clients for WPA and WPA2.

    Brgds Nico

  • 2.  RE: Find WPA and WPA2 Connections

    Posted 07-31-2015 08:06
    Hi Nico,

    no there is no way to see that on the controller GUI.

    What I do in such case is to create a new SSID with AES-only and send out a new profile via group policy.
    Then observe the reports whether all clients move over to the new one before deleting the WPAv1/v2 WLAN service.