ExtremeWireless (Identifi)

  • 1.  Airmagnet Pattern Files for AP3805i

    Posted 10-10-2016 08:13
    Hi,

    did anyone already create the radiation pattern for the AP3805i Access-Points in Fluke Airmagnet?

    I did and it seems to be not really working as my 5GHz Radio has a lot of more coverage
    than the 2.4 GHz Radio

    Any ideas on that?

    regards
    Peter


  • 2.  RE: Airmagnet Pattern Files for AP3805i

    Posted 11-14-2016 16:02
    Hi Peter,

    I do not have a radiation pattern created in Fluke Airmagnet, but this is the data sheet for the WS-AP3805i and has radiation patterns for both radios. (I'm assuming you likely have already seen this but did not see a reply to your post)

    http://www.extremenetworks.com/product/ap3805/

    If there is a big discrepancy in the signal you're seeing, perhaps it is due to country or channel/config settings. If needed, we could open a case to investigate for you.

    Thanks,
    Jason


  • 3.  RE: Airmagnet Pattern Files for AP3805i

    Posted 11-14-2016 16:15
    Hi Jason, Already fixed that myself we had to adjust some parameters in the Airmagnet Settings - nevertheless pattern files would be great as other vendors patterns are delivered with Airmagnet for free and you save much time when you dont have to create them manually Peter