ExtremeWireless (Identifi)

  • 1.  Session Availability on IdentifI Wireless Controller C35

    Posted 05-31-2016 05:58
    I have few question about Session Availability on IdentifI Wireless Controller C35.I have three controller on different location and each Controller have own APs. If I need to use C35-No.1 is Primary for APs-No. 1 to 25 and Backup for APs-No. 26 to 50, C35-No.2 is Primary for APs-No. 26 to 50 and Backup for APs-No. 51 to 75, C35-No.3 is Primary for APs-No. 51 to 75 and Backup for APs-No. 1 to 25. (can see in picture).



    Could I do with this Topology?

    Thank you

    PIYAPONG



  • 2.  RE: Session Availability on IdentifI Wireless Controller C35

    Posted 05-31-2016 06:01
    HA is only working in pairs, Controller#1 and 2, Controller 3 and 4.

    -Ron


  • 3.  RE: Session Availability on IdentifI Wireless Controller C35

    Posted 05-31-2016 06:15
    Hi Piyapong,

    additional notes for Session Availability:

    - Required Fast Failover to be enabled
    - Requires NTP to be configured on each Controller
    - Applies to WLAN clients on B@AC VNS's and B@AP VNS's

    Best practice is to use the Availability Wizard to reduce the chances of misconfiguration between controllers.

    Regards
    Engin



  • 4.  RE: Session Availability on IdentifI Wireless Controller C35

    Posted 06-01-2016 06:47
    Thank you.

    PIYAPONG


  • 5.  RE: Session Availability on IdentifI Wireless Controller C35

    Posted 06-02-2016 16:59
    For more than 2 controllers you can use the mobility feature. Then a client can roam from ap on controller A to ap on controller B to ap on controller C



  • 6.  RE: Session Availability on IdentifI Wireless Controller C35

    Posted 06-06-2016 06:06
    Thank you, Raffi

    I will try to implement with HA for Controller 1 & 2, And use Mobility between HA & Controller 3.

    Thank you for advising.

    PIYAPONG