ExtremeWireless (Identifi)

Expand all | Collapse all

Problem to integrate Purview and EWC

  • 1.  Problem to integrate Purview and EWC

    Posted 01-15-2019 23:46
    I have problems for the EWC to send Netflow traffic to the Purview, having the following:

    Purview version: 8.1.5.22
    EWC version: 10.41.11.0009

    There is only one interface in purview for both traffic collection and administration. EXOS switches are currently configured by sending sflow.

    I have made the configuration in the EWC to send the traffic of the WLANS to the Purview engine. The promiscuous mode is enabled in all network segments.


  • 2.  RE: Problem to integrate Purview and EWC

    Posted 01-18-2019 13:28
    Hello Kevin:

    Make sure you are using esa0 int (not Admin) for sending netflow traffic from EWC to the Purview appliance.
    Also, certify the udp port 2095 is allowed in your network.
    A tcpdump taken from the purview may help you identify if it's been receiving traffic from the EWC.

    Following are couple articles that may help:

    https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-Identifi-Wireless-Controller-to-send-data-to-Purview

    https://gtacknowledge.extremenetworks.com/articles/Q_A/What-port-does-Netflow-use-on-the-Indentifi-Wireless-controller-to-talk-to-Purview-appliance

    Adilson