ExtremeWireless (Identifi)

Expand all | Collapse all

Enable availibilty at C5210 and have problem to view atatus

  • 1.  Enable availibilty at C5210 and have problem to view atatus

    Posted 09-10-2017 03:22
    I have two C5210 wireless controller and Enable Availibility and some AP status is at EWC1 is inactive and at other EWC (EWC2) is Active.
    the other Problem is I cannot Reboot AP by Controller.
    please help me to solve this problems.

    thanks



  • 2.  RE: Enable availibilty at C5210 and have problem to view atatus

    Posted 09-10-2017 15:25
    I strongly suggest that you attend the official training to learn more about the controller functions...

    http://www.extremenetworks.com/education/courses/ESE-HI-1/

    Let's assume you run v10 as you didn't mentioned the installed software version.
    On controller#2 in the GUI > AP > APs > Foreign > select all > Actions > Release

    That should terminate the tunnel from controller#2 to the APs and the APs should open a tunnel to controller#1

    Cheers,
    Ron


  • 3.  RE: Enable availibilty at C5210 and have problem to view atatus

    Posted 09-11-2017 01:49
    thanks