ExtremeWireless (Identifi)

Expand all | Collapse all

Check the performance of an AP depending on the power it recieves

  • 1.  Check the performance of an AP depending on the power it recieves

    Posted 02-20-2018 05:40
    Hi Guys

    Is there a way to see what performance the AP gives depending on the power it receives.
    I know the 3935 will transmit on 2x2 when it only gets 15w power and 4x4 on 25w.
    But is there a place to confirm it is broadcasting at that either via the Gui on the controller or the CLI of the AP.

    Regards


  • 2.  RE: Check the performance of an AP depending on the power it recieves

    Posted 02-20-2018 07:14
    Hi Cornel,

    From the home screen on the GUI you are able to view AP's that are in low power mode in the health table.

    Hope this helps.

    Best regards,
    Sam


  • 3.  RE: Check the performance of an AP depending on the power it recieves

    Posted 02-20-2018 07:35
    Hi Sam

    Thanks for that.

    I completely forgot about that......
    Been a long 2 weeks.

    Regards