ExtremeWireless (Identifi)

Expand all | Collapse all

I have an WS-AP3805i with flashing green leds

  • 1.  I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 15:31
    I have an WS-AP3805i that had been working but now the radio leds and power led are alternating flashing green. So the radio leds flash green and then the power led flashes green.


  • 2.  RE: I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 16:19
    Jeff,

    So it's not working in this state? It may not be able to reach the controller for some reason.

    Flashing Green Indicates:
    • Running a self test
    • Loading software program



  • 3.  RE: I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 16:25
    Hi Jeff, if service is providing it could be that your AP is working in br@ap in absence of the controller. Regards Umut Aydin


  • 4.  RE: I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 16:26
    No it's not working. In the controller console it's showing up as inactive. I'm now noticing that the power led is flashing orange if that makes a difference?


  • 5.  RE: I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 16:50
    Check the GUI > Reports > APs > Active APs.
    Is the AP listed or not = active tunnel to the controller.

    If not - does the AP get an IP, could you ping it, could you ping it from the controller interface that is enabled for AP registration.


  • 6.  RE: I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 17:00
    ...then if you can ping it, can you SSH to it?


  • 7.  RE: I have an WS-AP3805i with flashing green leds

    Posted 08-07-2018 17:14
    I reset the port on the switch and it's working now, thank you for the help, I'll have to watch this one and see if it keeps working