ExtremeWireless (Identifi)

Expand all | Collapse all

Identifi: proper topology configuration for branches

  • 1.  Identifi: proper topology configuration for branches

    Posted 10-24-2017 17:34
    Hello, everybody!

    I am testing Identify in a bank.

    It has HQ (where@EWC works) and several branches, connected to HQ with VPN. There is a direct visibility - I can ping resources in braches from HQ.

    All branches has their own Internet gateway and I don't want HQ to be gateway for branche's wifi users traffic. So, it seems that@AP topology would be the most suitable.

    The problem is there is no VLANs in branches. It's a small /24 networks.

    But Identify doesn't allow me to create several topologies in VLAN 1. And it can't change network equipment in braches to new ones, which support dot1q subinterfaces. How can I separate branches' networks?

    Is there any solution?

    Many thanks in advance,

    ILya


  • 2.  RE: Identifi: proper topology configuration for branches

    Posted 10-24-2017 17:37
    Hello

    Just use the B@AP untagged topology that comes with the controller by default. It will put all users directly into the local vlan that the AP port is configured for.


  • 3.  RE: Identifi: proper topology configuration for branches

    Posted 10-24-2017 17:37
    Thanks, Craig,

    I'll try to do that tomorrow.