ExtremeWireless (Identifi)

  • 1.  WLAN service best practices

    Posted 11-24-2016 03:49
    Are there any best practices for WLAN service settings? Similar to the AP radio best practices, but for things like Flexible Client Access, 11k (including Beacon Report, Quiet IE), opportunistic keying/preauth etc. In the past I've turned some of these off while debugging other problems, but I can't remember why or if I should turn them back on.

  • 2.  RE: WLAN service best practices

    Posted 11-24-2016 05:23

    Thanks for your query.

    The 11K Beacon Report/Quiet IE is a useful setting to support potential roaming options for your clients. Please use the below GTAC article. https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-Nearby-AP-Report

    However, I believe that there is a known issue with this setting causing some issues with VoIP phones in the latest codes.

    I would recommend that you not enable these settings unless specifically instructed by TAC.

    Please let me know if you have any further queries.

    Praveen Jo

  • 3.  RE: WLAN service best practices

    Posted 11-24-2016 07:18
    Hi James,

    As per below KB , FCA feature needs to upgrade 9.21.07 or higher.



  • 4.  RE: WLAN service best practices

    Posted 11-26-2016 05:14
    Honestly, every environment is so different. Experimenting is the best way to find out. Most of the settings are easy to change, so making small changes and then observing for a few days, will go a LONG way to figuring out what features are helping and what ones are hurting.

    However, I cannot suggest turning on 802.11k. It causes all of our APs to reboot with a kernel panic "Out of cookies" running But again, maybe that is just our environment... so testing is the best way to find out. Unfortunately, there is no silver bullet, I wish there was... trust me 🙂.

    Also, as stated, GTAC can provide more insight on why you might what to consider turning on or turning off some settings.

  • 5.  RE: WLAN service best practices

    Posted 11-26-2016 05:14
    Hi Jeremy,

    in last V10.11.05 Release Notes are these issue fixed:
    wns0016413: Improved reliability of 4-way handshake in congested environments which could affect sensitive clients

    This solves maybe your hurt with 802.11k.

    Otherwise do you open a GTAC Case already?
    If not i encourage you to do that!
    This will help you and all other extreme networks users ...


  • 6.  RE: WLAN service best practices

    Posted 11-27-2016 00:09
    Hi James,

    you can create test LAB set up and contact GTAC for any issues.

    So that we can make sure production network is not affected.