ExtremeWireless (Identifi)

  • 1.  "Total clients" the two pair of controllers in HA?

    Posted 12-13-2015 09:12
    It’s possible to obtain the total clients associates in two controllers working as HA-pair? In the reports —> custom report—>obtains the “total associate clients per controller”, not the total in two controllers. Thanks.


  • 2.  RE: "Total clients" the two pair of controllers in HA?

    Posted 12-14-2015 11:09
    Yes, the below screenshot show "all clients" on 4 WLAN appliances = 2 pairs.

    -Ron




  • 3.  RE: "Total clients" the two pair of controllers in HA?

    Posted 12-14-2015 17:25
    Thanks, now is possible, curiously, other times when was selected the second "Target: Wireless Network", the system delayed a lot of time before to show all active MAC address (>8.000), no the option "wireless network", but this time I waited, and finally showed the option "wireless Network". This was what i looking for, thanks again.


  • 4.  RE: "Total clients" the two pair of controllers in HA?

    Posted 12-15-2015 17:56
    Continuing with the "total clients", there is some SNMP variable to obtain this value? i know the individual SNMP variable per IP controller, not by the "wireless network"(HA-pair). Thanks.