ExtremeWireless (Identifi)

Expand all | Collapse all

AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

  • 1.  AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:23


    I have more than 50 AP 3805i connected at X440G2-24p-10G4 and X440G2-48p-10G4 switches.



    One AP connect with 100 mb instead of 1Gb.



    Port settting on the switch is auto. Also at the AP.



    I noticed that the interface setting on the AP is 10 or 100 Mb and not 1Gb??.



    I already cleared the config of the AP but it stays 100 Mb



    Other AP’s connect with 1Gb.





  • 2.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:33
    Hi johan,

    did you reset the AP?
    from where you see your AP is showing low link speed?



  • 3.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:33
    It could be due to cable fault also!!
    please check once and do the factory default AP.


  • 4.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:33
    I agree, check the cabling...


  • 5.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:37
    If you move that AP to different port, will that change? If you swap AP with other AP in the same port. Will that change?


  • 6.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:37
    i don't think it will work, bcz all remaining APs except this AP are working on gig link.


  • 7.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:49
    I did a reset of the AP. I see the slow link in the dashboard and on the switch. I will check the cabling.


  • 8.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:49
    do you have any WLC?


  • 9.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:49
    one thing you can also try just manually configure the link speed for that APs.


  • 10.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:49
    The link speed will be 10 Mb of 100 Mb. I cann't select 1Gb



  • 11.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:49
    on switch you can configure the Speed for that particular port.
    "configure port auto off speed < speed > duplex


  • 12.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 06-21-2018 04:49
    you'll have to check the cable, a lot of times we see problems with the cable category.


  • 13.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch

    Posted 07-02-2018 12:13
    cable is replaced and teh connection is 1GB. Thanks all


  • 14.  RE: AP3805i connect only at 100 Mb at X440G2-48p-10G4 switch