ExtremeWireless (Identifi)

  • 1.  Wireless V2110 Station Event Detail

    Posted 03-21-2017 08:28
    Good Morning, i want to know the meaning of Voice "ROAMED = NO " in attached file.
    We have some issue with Ascom I62 / OpenStage WL3 and Acess Point 3805 - 3965i.

    Thank You
    Giuseppe




  • 2.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 09:33
    Hi Giuseppe,

    Are you referring to "Roamed: No" from the screenshot provided under station current information?

    Regards,
    Nathiya M


  • 3.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 09:41
    Yes, is correct, as i said before, I have some issue with the Ascom I62 and AP3805/3965i

    Giuseppe


  • 4.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 09:57
    Hi Giuseppe,

    That means, whether the client roamed to another AP or stationary.
    Could you please explain the issue with Ascom I62 and AP3805/3965i?
    What is the code version running on the controller?

    Regards,
    Nathiya M


  • 5.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 09:57
    Are you sure - I think it's roaming to another controller in a mobility group = inter-controller roaming.


  • 6.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 09:57
    Or to be more precise... it show whether the client is local or foreign from the POV of this controller.

    No = local
    Yes = foreign


  • 7.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 09:57
    thankyou


  • 8.  RE: Wireless V2110 Station Event Detail

    Posted 03-21-2017 10:04
    The version of controller is V2110-10.21.02.0017


  • 9.  RE: Wireless V2110 Station Event Detail

    Posted 03-22-2017 15:01
    Hi Giuseppe,

    without having much info..

    a quick test if you always see the issue ..means if you can reproduce the issue at will...
    then look on which AP the ASCOM is connected and on which radio and change the DTIm settings from 5 to 2 on the AP config( advance button) and look if you see immediately any improvements.

    Additioanlly I would recommend to update to 10.21.03.

    Regards

    Umut Aydin


  • 10.  RE: Wireless V2110 Station Event Detail

    Posted 03-23-2017 12:15
    OK, I changed the value of DTIM from 5 to 2..but sometimes we have the same Issue.
    So I changed the radio frequencies from 2.4GHZ to 5 GHZ. In your Opinion is better to put static channel or automatic channel, the same thing for Power, better static or automatic ?
    thanks

    Giuseppe


  • 11.  RE: Wireless V2110 Station Event Detail

    Posted 03-23-2017 15:06
    Static is recommended.

    Rgds
    -Umut